Phases of a mechanical controlled ventilation system installation project

Phases of an installation project of a ventilation system, We are talking, of course, not only about a home but also about any commercial or public-use premises. But into how many phases is the installation process divided? Here, we break them down one by one.

Installation project of a controlled mechanical ventilation system

Installing a mechanical ventilation system without carrying out a customized project according to the characteristics of the property can have dire consequences. For example: heat leaks that cause extra heating costs and discomfort for the occupants or the entry of noise and cold air from the outside, among other problems.

Therefore, the main objective of the installation project of the controlled mechanical ventilation system is to improve users' comfort, while maintaining high standards of energy efficiency in the building.

Architectural planning phase

This is the first stage of the ventilation system installation project. In it, primarily, the physical characteristics of the property are taken into account to carry out the calculations that lead to the most suitable design.

In this regard, the maximum flow velocities and the maximum pressures of the supply and extraction outlets play a key role. What’s the reason? Only by taking them into account is it possible to minimize the noise generated by the system and ensure the acoustic comfort of the occupants.

However, these are not the only factors to consider during the architectural planning phase. We must also consider:

• Ensuring the tightness of the network. That is, avoiding unnecessary cold or heat losses due to poor structural design.
• Minimizing load losses. The lower the pressure inside the circuit, the less consumption it will generate.
• Reducing the noise caused by the operation of the ventilation system. In some cases, the presence of sound silencers may be essential.

Installation phase

Once the planning phase is complete, it's time to proceed with the installation of the controlled mechanical ventilation system. Everything must be carried out based on the projected plans and using qualified and experienced labor. The time needed to carry it out will depend on the characteristics of the premises or housing.

Recommendations

Unfortunately, there are many cases where the installation is not carried out based on the plans defined in the design phase. This can be due to the lack of capacity of the installers, unforeseen architectural peculiarities, or poorly made calculations.

In any case, we must always avoid these deviations, especially if they represent a layout different from the one originally projected. The reason is that the mechanical controlled ventilation systems are very sensitive to modifications. Any change can significantly reduce their capacity.

Besides, projects are customized, so we should never change the system on the fly to save costs. It is also necessary to vigilantly monitor the tightness of the network and the drainage of condensates, especially if we are facing a double flow installation.

Once we ensure that the controlled mechanical ventilation system has been installed according to the designed project, it will be time to define maintenance plans for the ventilation unit and ducts. This will be the best guarantee that the installation will remain in perfect condition for as long as possible. Thus, we will enjoy air of the highest quality within the space and, in addition, ensure great thermal comfort and a high energy efficiency index.